Dash Cam Hardwire Kit, Mini USB Hard Wire Kit Fuse for Dashcam, Plozoe 12V-24V t

Description

Dash Cam Hardwire Kit, Mini USB Hard Wire Kit Fuse for Dashcam, Plozoe 12V-24V to 5V/2A Car Dash Camera Charger Power Cord（13ft）
Dash Cam Hardwire Kit 13ft Mini USB
This mini usb cable and Micro USB port converter hardwire kit. Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Plozoe Dash cam hardwire kit works for almost all car mini & micro USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc.
Installation in minutes with little to no expertise required.13ft/4 meter power cable included.
Technical Details
Connector: Mini USB Connector
Input Voltage: DC 12V-24V
Output Voltage: 5V
Output Current: 2A
Working Temperature:-40~ 160 Degree F
Cable Length: 13ft/4m
Low Voltage Protection: 11.5V for 12V vehicle; 23.5V for 24V vehicle.
Safety Notes
Pertorm the installation with the ignition in the OFF position.
Do not strip any live wires.
Correct electnical polarity and grounding is required for safe and proper installation.
Only connect to a negative ground DC supply circuit.
Not for installation to positive ground circuits.
If you don't have experience on installing the hardwire kits for the dash cam, please ask professional for help.
The main function
Low Voltage Protection
Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.5V(24V cars), thus preventing it draining the battery.
Battery Drain Protection
Set ACC power failure protection. If you are worried that the car battery will be exhausted, you can turn off the 24-hour protection function. Leaves you with enough power to start your car, and will not damage the battery.
24 Hours Parking Surveillance
The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.Note: If you don't need this function, please use Connect the Yellow Wire of the Hardwire Kit with positive terminal of your Constant Fuse Slot.Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box.
High Quality Copper Conductor
4.3mm transmission line, high-quality copper core conductor, the dashcam hardware kit is faster and safer to charge
Scope of application
Four Types of Fuses Adapters for Almost All Cars
Comes with Low-profile mini fuse, Mini fuse, Micro 2 fuse, ATO (regular) fuse adapters for you to use whatever your vehicles fuse box requires.
Besides, with the seal wire connectors that will be easy for you to connect, firm connection and prevent short circuit.
Mini USB & Micro USB for All Dash Cam
This hard wire dash cam comes with a Mini USB and Micro USB connector which suitable for almost of dash cams, GPS Navigator, Radar Detector. Meeting your requirement.
Upgraded the 2nd Generation Dash Cam Hardwire Kit
An automatic matching device is set at the mini connector to make the compatibility range wider, such as Apeman Aukey Rexing Vantrue Vava Garmin Dash cam, etc.
Compatible 12 – 24V Vehicles
This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power.
Installation steps
Find the Correct Fuse Slot
Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.
Connect the Red Wire
Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box.
Connect the yellow Wire
Connect the Yellow Wire and red Wire Simultaneously of the Hardwire Kit with positive terminal of your Constant Fuse Slot.can uninterruptedly supply power for dash camera for 24 hours. Note: If you don't need this function, please use Connect the Yellow Wire of the Hardwire Kit with positive terminal of your Constant Fuse Slot.Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box.
Ground the Hardwiring Kit
Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.
Upgraded the 2nd Generation Dash Cam Hardwire Kit-Mini USB Upgraded the 2nd Generation Dash Cam Hardwire Kit-Micro USB Upgraded the 3nd Generation Dash Cam Hardwire Kit-Mini USB Upgraded the 2nd Generation Dash Cam Hardwire Kit Upgraded the 2nd Generation Dash Cam Hardwire Kit-Mini USB Input: 9V-30V 9V-30V 9V-30V 9V-30V 9V-30V Output: 5V / 2A 5V / 2A 5V / 2A 5V / 2A 5V / 2A Length 11.5ft 11.5ft 11.5ft 13ft 11.5ft Connector Port Mini USB Port Micro USB Port Mini USB Port Mini USB Port Mini USB Port Low Voltage Protection √ √ √ √ √ √ Parking mode X X X X X Mini USB to Micro USB conversion cable X X √ √ X Fuse Holder √ √ √ √ √ X
Upgraded the 2nd Generation Dash Cam Hardwire KitAn automatic matching device is set at the mini connector to make the compatibility range widerSet 6 highprecision resistors intelligent lowvoltage protection device can read the battery voltage more accurately thereby preventing battery wearSet ACC power failure protection If you are worried that the car battery will be exhausted you can turn off the 24hour protection function
24 Hours Surveillance Connect the Yellow WireBAT and red WireACC Simultaneously of the Hardwire Kit with positive terminal of your Constant Fuse Slotcan uninterruptedly supply power for dash camera for 24 hours Note If you dont need this function please use Connect the Yellow Wire of the Hardwire Kit with positive terminal of your Constant Fuse SlotConnect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box
High Secure StandardsThe mini USB hardwire kit with builtin High Precision switching power supply module can transform 12V24V to 5V The builtin safeguards protect your devices against excessive current overheatingInput12v 24v Output 5v 2AInput length3ft Output length10ftOverall 13ft hardwire kit can be installed basically on All vehicles
Wide CompatibilityThis hardwire kit is suitable for most car modelsVoltage between 1224V Our hardwire kit Equipped Mini USB ports and Micro USB conversion cableworks for almost all car mini USB Micro USB ports device such as dash cammirror camGPS navigator and radar detector etc
Easy InstallationYou will get 1 x Mini USB hardwire kit1 x installing crowbar1 xMini USB to Micro USB conversion cable8 x fuse tap cableSimple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices TIPS Please read the quick guide carefully before use